Today we added the page https://my.blueriq.com/display/DOC/Webinar+Blueriq+theming+with+Angular where you can find the slides and the recording of the webinar. Enjoy!
December 4th 2018, 1.00 – 2.00 P.M.
In this webinar we will show you our new default Blueriq theme based on Material design, built with Angular. Our theme may serve as a kick-starter which is easy to extend or can be used as a reference implementation for a new customer frontend. It is enabled by the new frontend toolkit and architecture.
This architecture gives you multiple opportunities to adapt components more easily and make deployment and migrations effortless. Thus enabling you to create a modern user centered Blueriq application.
This webinar is interesting for:
- UI developers
- Business Engineers
- Technical Engineers with affinity for user interaction
Yesterday we released version 11.6.1, containing important fixes. Please upgrade.
IMPORTANT Our Blueriq Community my.blueriq.com will be unreachable coming Friday August 10th between 7.00 - 11.00 o’clock CET. This is due to maintenance on the underlying software. Around 11.00 o’clock we expect to have it up and running again. Sorry for the inconvenience.
Regards, The Blueriq Team
A new list of usability improvements has been published for you to vote on. Let your voice count, and go to:
We have just released patch version 11.1.1
Bugfixes
With release 11.1.1 the following bugs have been fixed:
Incident number | Component | Summary / problem | Resolution |
|---|---|---|---|
| BQ-4867 | Runtime | Previously, input validation of BAARS services being done after the complete message was parsed was available only when using Schema Sets. | Input validation of BAARS services being done after the complete message is parsed now also works when using Domain Schemas. |
| BQ-4930 | Runtime | Reload projects from the development dashboard in the Blueriq Runtime does not load model changes from Studio when the actuator profile is active | Reloading projects from the develoment dashboard in the Blueriq Runtime now works again. The correct monitored application is returned from the actuator component |
For download and more details please refer to the full release notes: Release 11.1.1
This week several CVE's were fixed for the Blueriq Runtime, BMA and BCC.
Blueriq Runtime
With release 10.10.4 the following bugs have been fixed:
Incident number | Component | Summary / problem | Resolution |
|---|---|---|---|
| BQ-4869 | Runtime | Spring CVE (https://spring.io/blog/2018/06/14/spring-project-vulnerability-reports-published) | Fixed by upgrading to Spring Boot 1.5.14. Please update CDS to 1.0.8 as well. |
Blueriq Model Analyzer
With release 2.2.1 the following bugs have been fixed:
Incident number | Summary / problem | Resolution |
|---|---|---|
| BMA-238 | The spring framework published a list of CVE (https://spring.io/blog/2018/06/14/spring-project-vulnerability-reports-published) | Fixed by upgrading to Spring Framework 4.3.18. |
Blueriq Control Center
With release 1.2.13 the following bugs have been fixed
Reference | Issue | Solution |
|---|---|---|
| CC-596 | We upgraded Spring Boot to 1.5.14 |
We would like to invite you for a short questionnaire about the performance and support of Blueriq. As a Blueriq user, your feedback is very important to us. We actively use the feedback to improve our product and provide you with the best possible service.
The survey should take about 5-10 minutes to complete. Although the survey is in English, you can give your feedback in Dutch if you prefer. We ask you to complete the questionnaire before July 13th, 2018. Press the button below to start the questionnaire.
START SURVEY
We will keep your response confidential and only use it to improve our product and support. If you prefer personal contact, you can leave your contact information at the end of the questionnaire.
We look forward to your response!
Blueriq
Blueriq is pleased to announce the release of Blueriq 11.0. We are very proud of this new major release, which leads us further into the cloud. In this release, we focused on having scalable and resilient runtime forms, improved scheduling mechanisms for the process engine, improved Blueriq as a web service and function integration, asynchronous aggregate data publishing to external consumers such as BI systems, an Angular front-end for state-of-the-art user experience and metrics and statistics for maintaining the runtime in production. The new release is now available and can be downloaded from our download site.
For further details about this release please read the full Release Notes.
We recently have release a few bugfix releases.
Blueriq Studio&Runtime
Blueriq release 10.10.1 contains several bugfixes.
For more details please refer to: Release 10.10.1
Blueriq Control Center
| CC-589 | We upgraded Spring Boot to 1.5.13 |
For more details please refer to: BCC 1.2.12
Blueriq model Insight
Incident number | Summary / problem | Resolution |
|---|---|---|
| BMI-100 | Spring CVE (https://spring.io/blog/2018/04/05/multiple-cve-reports-published-for-the-spring-framework) | Fixed by upgrading to spring boot 1.5.11 |
| BMI-103 | Spring CVE (https://spring.io/blog/2018/05/09/spring-project-vulnerability-reports-published) | Fixed by upgrading to spring boot 1.5.13 |
For more details please refer to: BMI Release 1.2.3
This week we have fixed some CVE's in Blueriq Runtime, Blueriq Control Center and Blueriq Model Analyzer.
Besides the CVE's we also fixed several bugs in the Runtime and Studio.
For all details please refer to the relevant release note pages as mentioned below:
Blueriq Runtime
Critical CVE's found in Spring Framework. https://spring.io/blog/2018/04/05/multiple-cve-reports-published-for-the-spring-framework
For other bugfixes please also refer to: Release 10.9.1
Blueriq Model Analyzer
CVE-2018-1270, CVE-2018-1271, CVE-2018-1272 were detected, regarding dependencies used by the BMA
CVE-2016-5007 was detected, regarding a dependency used by the BMA
Blueriq Control center
https://spring.io/blog/2018/04/05/multiple-cve-reports-published-for-the-spring-framework
Regards,
Blueriq Support
We are pleased to announce the newest Blueriq release! In this release, we focused on Swagger feeds. The new release is now available and can be downloaded from our download site. For further details about Blueriq 10.9, please read the full Release Notes. Please let us know what you think of this release and contact us.
Upgrade instructions
Release 10.9 has specific upgrade instructions that you need to take into account when upgrading to this version. Also make sure to take a look at the general upgrade instructions.
Did you know that it is not allowed to send Message events from within your process to process instances of the same type?
The process engine is based on the BPMN 2.0 specification. Therefore the process engine handles message events the same way BPMN 2.0 specifies. This article explains how BPMN 2.0 specifies message events and how Blueriq implements this specification.
Full article: Message events: BPMN 2.0
On Monday morning March 19th our JIRA will be moved from https://tools.blueriq.com/jira to https://jira.blueriq.com
This means the Blueriq Customer Portal will be temporarily offline on Monday morning.
For those of you using a bookmark to the Customer Portal please change this from https://tools.blueriq.com/jira/servicedesk/customer/portal/2 to https://jira.blueriq.com/servicedesk/customer/portal/2
Kind regard,
Blueriq support
Blueriq is pleased to announce the release of Blueriq 10.8 & 9.9.19. In these releases we focused on bugfixing and improvements. These releases are now available and can be downloaded from our download site.
Release 10.8
Routing algorithm extension
We have improved the reevaluation of the routing algorithm for assigned tasks. A new option has been introduced at the definition of the routing algorithm: Overwrite manual assignments.
Saxon replaces Xalan
Blueriq relies on the Xalan framework to generate Blueriq Documents, render HTML when using the XSLT plugin and creating SOAP requests when using the AQ_SoapServiceClient. As the Xalan framework is no longer supported we made the decision to move to the Saxon framework instead.
Platform Support changes
Added support
- Tomcat 9.0,
- JBoss EAP 7.1
- Websphere Liberty Core v17.0.0.4
- JDK 9 support is added (please note that you should add the VM argument
--add-modules java.xml.wsto run properly)
Removals
- Tomcat 8.0 support is removed in favor of Tomcat 8.5 and Tomcat 9.0
- Websphere Liberty Core v17.0.0.2 is removed in favor of Liberty Core v17.0.0.3 and Liberty Core v17.0.0.4
Bugfixes
Release 9.9.19
Bugfixes
With release the following bug has been fixed:
Incident number | Component | Summary / problem | Resolution |
|---|---|---|---|
| BQ-3205 | CVE | Newly reported security vulnerability found in the Blueriq Runtime: CVE-2018-5968, we need to update affected Library's | Affected library's by CVE have been updated: jackson to version 2.9.4 |
| BQ-2861 | Runtime | If during a transaction a relation is set, and this relation implies the removal of an other relation, that second removed relation is not restored at rollback. | If during a transaction a relation is set, and this relation implies the removal of an other relation, the removal of the second relation is added to the transaction. As a consequence it the removed relation is restored at rollback. |